Ibanez S5470F

SPECS

Neck Material:	5pc Maple/ Walnut
Neck Type:	Super Wizard Prestige
Body:	Mahogany body/ Flamed Maple top
Frets:	Jumbo frets
Fingerboard:	Rosewood
Inlay:	Pearl Off-set dot S Prestige inlay
Bridge:	ZR2 bridge w/ZPS3
NeckPU:	HGD1
MiddlePU:	ST2
BridgePU:	HGD2
HW Color:	CK
Finishes:	SPB, RVK

FEATURES

	5pc Super Wizard HP Prestige neck with KTS™ Titanium Reinforcement rods inside. The "HP" stands for High Performance, for a more comfortable neck feel and smoother neck shape.
	The S Prestige features the fearsome combination of Hot Grinder pickups in the bridge (HGD2) and neck (HGD1) positions and a Short Tracer 2 pickup in the middle for unlimited tonal choice.
	Back view of a S5470FRVK's ZPS3 Spring System.
	The S Prestige features the amazing ZR2 bridge and ZPS3 Spring System for radical trem effects and incredible tuning stability.

ZRII TREMOLO

Zero Resistance technology, yet another Ibanez tremolo improvement, replaces standard knife-edge pivots with a ball-bearing based pivot joint, which provides greater tuning stability.

FEATURES

	This unique system stabilizes the bridge and insures tuning stability by consistently returning the tremolo to the center point (or zero point). In addition to the usual tremolo springs, the Zero Point System features two additional springs which insures the bridge’s return to the center point.
	The Zero Point system adjustment can be quickly set by hand–there’s no need for a hex wrench.
	The ZR tremolo uses a ball-bearing based system for precision and friction-free smooth action.
	Just unscrew the built-in intonation adjustment tool from the base and screw it into the bottom of each saddle for quick adjustments.
	The locking bolt is offset from the center of the saddle, which allows easy access to the bolt without loosening the strings.
	Zero Resistance technology, yet another Ibanez tremolo improvement, replaces standard knife-edge pivots with a ball-bearing-based pivot joint, which provides greater stability.
	The new snap-in arm socket ensures proper arm placement and easy removal. Arm torque is easily adjusted by tightening or loosening the screw located in the arm holder.
	The ZPS3 spring system represents the next phase of Zero Point evolution. The new ZPS3 is made of lightweight and durable Duralumin, reducing overall weight as well as cavity size on the guitar body’s back.

S PRESTIGE SERIES BASICS

• Precision-made in Japan by our most experienced luthiers
• The original, sleek S body, slender at the edges for comfort, and thick around the pickups for warm, fat mahogany tone
• 24-fret lightning fast 5-pc Prestige Super Wizard HP necks
• ZR-2 tremolo w/ZPS3
• Ibanez Hot Grinder (humbucker) pickups are specially designed to complement the S mahogany body for extra volume with no loss of projection or clarity
• Short Tracer (single) pickups add greater versatility and can even produce the most subtle tones when needed
• Includes hardshell case

FINISHES

SAPPHIRE BLUE

RED VIKING

NECK DIMENSIONS

Scale/Length 648mm/25.5" a: Width at Nut 43mm b: Width Last Fret 58mm c: Thickness 1st Fret 17mm d: Thickness 12th Fret 19mm Radius 430mm

PICKUPS

Bridge Pickup
Name:	Hot Grinder 2
Model No:	HGD2
Construction:	Humbucking
Magnet:	Ceramic
Description:	Hot, but sharp enough to hear the pick bite the strings.
Middle Pickup
Name:	Short Tracer
Model No:	ST2
Construction:	Single Coil
Magnet:	Neodymium
Description:	Alnico magnet provides full output in low profile setting.
Neck Pickup
Name:	Hot Grinder 1
Model No:	HGD1
Construction:	Humbucking
Magnet:	Alnico
Description:	Hot, but sharp enough to hear the pick bite the strings

SWITCHING SYSTEM